Dial-Up Networking Configurations
for Pioneer Internet Users

Step 1:

1. Double-click on MY COMPUTER. Double-click on Dial-Up Networking.

2. Double-click MAKE NEW CONNECTION.

3. Enter Pioneer Internet to name the connection.

4. Enter the area code and your local internet access number (with no dashes or spaces). Choose NEXT. Choose FINISH.

5. In the DIAL UP NETWORKING window, right click on the PIONEER INTERNET icon and go to Properties.
   For Windows 95 users, uncheck - Use country code and area code.
   For Windows 98 users, uncheck - Use area code and dialing properties.

6. Go to the SERVER TYPES tab. Under Advanced Options check only - Enable Software Compression.
   Under Allowed Network Protocols check only - TCP/IP.
   Click on the TCP/IP SETTINGS button, Server Assigned IP address and Server Assigned name server address should be marked. At the bottom, check both - Use IP header Compression and Use default gateway on remote network.

7. Click OK twice.

8. You should now be back in the DIAL UP NETWORKING window, right click on the PIONEER INTERNET icon and CREATE SHORTCUT from the pop-up menu. When prompted to place the shortcut to the desktop select YES.

9. From your desktop screen, double-click your SHORTCUT TO PIONEER INTERNET.

10. Enter your USERNAME and PASSWORD as indicated in the dialog box (if available click SAVE PASSWORD).

11. Click CONNECT.

12. Your network conection will be established and you may launch your Internet Explorer or Netscape Navigator/Communicator Browser or E-Mail application.

Step 2:

1. Double-click on MY COMPUTER. Double-click on CONTROL PANEL. Double-click on NETWORK.

2. Make sure you have Microsoft DIALUP ADAPTER and Microsoft TCP/IP Dial Up Adapter protocol installed.

3. Highlight TCP/IP Dial Up Adapter.

4. Select PROPERTIES.

5. Under the IP ADDRESS tab in Windows 95 make sure Obtain an IP Address Automatically is selected.
   In Windows 98 first answer OK to "You have asked to change TCP/IP properties to Dial up adapter." then make sure
   Obtain an IP Address Automatically is selected.

6. Under the WINS CONFIGURATION tab make sure Disable WINS Resolution is selected.

7. Under the DNS CONFIGURATION tab set the following:

8. Select DISABLE DNS.

9. Click OK. Click OK again. Select YES when prompted to restart the system.